Yamaha CRW-70 Connecting

Connecting

1 Connect headphones to the headphone jack or use the audio cable provided to connect an audio device to the LINE OUT jack.

To LINE IN jack of audio device

Audio cable (provided)

LINE OUT jack

	Stereo mini-plug
Headphone	Headphones
jack	(optional)

2 Check that the power switch of the CRW-70 drive is turned off (→P. 18) and then connect the AC adapter provided (→P. 19).

Notes

•If the CRW-70 drive is directly connected to your computer, either disconnect the USB cable (→P. 24) or turn off the power switch of your computer.

•If you connect an audio cable to your audio device, either turn the device off or turn the volume right down before connecting.

Contents

Page Page Page English WARNING CAUTION Page ■Precautions for Transportation ■WARRANTY Table of Contents Handling Discs and Data Handling Discs Copyright Disclaimer of Indemnity Supported Discs What is Orange Book Audio CDs and CD-ROMs What is CD EXTRA Partial CAV (Constant Angular Velocity) Features of the CRW-70Drive High speed writing/reading USB 2.0 compatible SafeBurn™ (Enhanced write stability technology) Reliable writing High-fidelitydigital audio CD TEXT support Audio CD and MP3 disc playback support Buffer Underrun defined Yamaha Buffer Underrun Protection Test writing for Buffer Underrun Before Use System Requirements Hardware Operating system (OS) CD writing software Hard drive space Serial Number Exterior Features 13LINE OUT jack 14DC IN connector 15USB () port 16Manual eject lever Display Loading/Removing a Disc Loading a Disc Removing a Disc Setup Procedure (Flowchart) STEP 1 Connect the CRW-70Drive 4 Connect the AC adapter provided to the DC IN connector of the drive 6 Turn on the power switch of the CRW-70drive STEP 2 Install the Device Drivers STEP 3 Make Sure that the CRW-70Drive Is Correctly Recognized For Windows 2000 Professional Hardware For Windows XP start STEP 4 Install the CD Writing Software Disconnecting the CRW-70Drive Listening to Audio CDs and MP3 Discs CDs/MP3 Discs that Can Be Played on the CRW-70Drive MP3 discs Listening to Audio CDs and MP3 Discs Playback sequence of MP3 files Connecting Playback Pause During Playback Skip Changing the Playback Mode Troubleshooting ●Is the USB interface card correctly recognized by the operating system The top cover does not open even when you press the eject button ●Is the CRW-70drive turned on ●Is any CD writing software being used ●Can the top cover be opened if the computer is restarted Troubleshooting Turn off the power switch of the No data can be read from a disc Are you sure the disc is of one of the types supported by the ●Is the disc dusty or dirty ●Does the busy LED light up correctly when a disc is loaded ●Is the USB cable connected to the CRW-70drive The playback of an audio CD (CD-DA)or MP3 disc cannot be heard ●Check that the volume is not set to the minimum level If you are using Windows Me and you cannot hear any playback sound from the 1 Setting “Properties” of the CRW-70drive YAMAHA Properties 2Setting Windows Media Player The error message “Buffer Underrun” is displayed Unstable operation ●Are two or more CD writing software programs installed on your computer Other problems ●Your CD writing software does not recognize the CRW-70drive Appendix Recording Methods Disc-at-Once(DAO) Track-at-Once(TAO) Session-at-Once(SAO) Packet Writing Firmware Checking the firmware version of the CRW-70drive Relationship Between Busy LED and Operation Relationship Between Display and Operation CRW-70Drive Specifications Page AC adapter (AD-301205) Safety/EMC compliance Index Page EUROPE, EASTERN EUROPE and RUSSIA U.S.A CANADA AUSTRALIA