Loading/Ejecting a Disc
Prior to the operation, check that the
1 Open the disc tray by pressing the eject button.
Press the eject button
2 Place the disc onto the disc tray properly with its label facing upward.
Or remove the disc from the disc tray carefully so not to damage it.
Place or remove the disc onto/from the disc tray
3 Close the disc tray by pressing the eject button or by gently pushing the disc tray into the drive.
Note
•Place or remove the disc after the disc tray has fully opened. Do not push or pull the disc tray with applying excessive force to avoid damage to the drive or the disc.
•The disc tray does not open while the application software prohibits ejecting, including when the drive accesses the disc.
21
