Using this unit
■Turning off this unit
1.When you have finished using this unit, press the STANDBY/ON button.
There will be a message to confirm turning off this unit. Press
the STANDBY/ON button again to turn off this unit. The lamp
turns off and the 
indicator flashes in orange while the fan is rotating to cool the lamp for approximately two minutes. This unit cannot be turned back on by pressing the STANDBY/ ON button in this state.
indicator (flashes)
STANDBY/ON |
| INPUT |
| STANDBY/ON |
LAMP | TEMP | PATTERN | AUTO | PATTERN |
/COVER | /FAN | 24P |
|
|
PATT
ESCAPEMENU
SELECT
STANDBY/ON
ASPECTINPUT
RESET STILL HIDE
2.When the lamp has cooled down, the 
indicator stops flashing and steadily lights in red.
3.Turn off the power switch after making sure that the fan has completely stopped and that the 
indicator is lit in red.
Important
•While the fan is rotating and the 
indicator is flashing in orange, never turn off the power switch or unplug this unit. This will cause significant damage to the lamp and may result in its shorter life or failure.
■Indicators
There are four indicators on this unit to display the operating status of this unit.
STANDBY/ON
|
| INPUT |
|
LAMP | TEMP | PATTERN | MENU |
/COVER | /FAN | ||
| 24P |
|
12 3 4
1 
Off | The power is turned off. |
Lights in red | In the standby mode |
Flashes in green | Getting ready to start operation |
Lights in green | Operating |
Flashes in orange | Cooling the lamp |
2LAMP/COVER
Off | Normal |
Lights in red | The lamp cover is not correctly attached. |
| The air filter cover is not correctly |
attached.
Flashes in red
The lamp usage has exceeded 1000 hours.
Flashes in red
The lamp usage has exceeded 1100 hours.
The lamp has burnt out.
3TEMP/FAN
Off | Normal |
Lights in red | The temperature inside this unit is |
| abnormally high. |
Flashes in red | The cooling fan is out of order. |
4 24P
Lights in blue | This unit has detected the interlaced |
| signal (480i) of |
| and is converting it to progressive |
| images. |
Off | Video signals other than the interlaced |
| signal (480i) of |
| being input. |