Inappropriate places for installation
If this unit is not correctly installed in an appropriate place, it may cause fire or failure, or damage to this unit may result. Carefully choose the place to install this unit by avoiding the places listed below.
1.Places where the temperature and humidity vary greatly
•Do not install this unit in a place where the temperature and humidity become extremely high or the temperature becomes extremely low.
•This unit must be used within a temperature range of
2.Places without adequate ventilation
•Install this unit with at least 10 cm (4 inch) of ventilation space on the top, right and left, and at the back of this unit.
•Do not cover the ventilation slots of this unit not to obstruct the heat dissipation.
•Install this unit on the firm surface.
•Do not cover this unit with a tablecloth, etc.
•Make sure there is nothing to get sucked into the ventilation slots so that the temperature of this unit does not become too high.
3.Places where it gets dusty
•If the air filters are blocked with dust, the temperature of this unit may become too high.
4.Places with too much vibration or impact
•Vibration and impact can damage parts of this unit.
5.Places where this unit gets exposed to water or high humidity
•If this unit is exposed to water or high humidity, it may cause a fire or electrical shock.
6.Unstable places
•If this unit is installed on an unstable or an inclined tabletop, it may fall and cause damage to this unit or personal injury.
Important
•Make sure no light other than the projecting light directly falls on the screen to ensure vivid
English
II