Additional information
■ Message display
Message | Condition |
|
|
NO SIGNAL | This unit is not receiving any input signal. |
|
|
INPUT A <COMPONENT> (Example) | The input name selected by the INPUT button is displayed. It will turn off 1 minute after the signal has |
| been input. |
|
|
OUT OF RANGE | This unit cannot receive the RGB signal that is coming into this unit. |
|
|
UNKNOWN FORMAT | This unit cannot receive the video signal that is coming into this unit. |
|
|
AUTO SYNC... | This unit is making the most appropriate setting according to the input RGB signal being received. |
|
|
STILL | The STILL (freezing the image) function has been activated. |
|
|
STILL OFF | The STILL (freezing the image) function has been cancelled. |
|
|
MEMORY | The memory setting number selected is displayed and turns off after 1 minute. |
|
|
ESCAPE:EXIT (Example) | Help messages are displayed for easier menu operation. |
|
|
LAMP REPLACEMENT TIME HAS | This message is displayed when the power switch is turned on after the lamp running time has exceeded |
COME. PLEASE REPLACE WITH A | 1000 hours. Press the ESCAPE button to turn off the message. |
NEW LAMP. |
|
PRESS “ESCAPE”TO REMOVE THIS |
|
INDICATION. |
|
|
|
PRESS AGAIN FOR STANDBY. | This unit will enter the standby mode and the lamp will turn off if the STANDBY/ON button is pressed |
| again. |
|
|