Controls and functions

■Front panel and terminal panel

Focus ring, zoom ring

Focuses and zooms the lens

Remote sensor
Lens cap
Lens
Ventilation (exhaust) slot
Terminal panel <side>

8

9

 

0

q

 

w

 

 

RGB/YPBPR/YCBCR

 

 

 

S VIDEO

VIDEO

 

INPUT B

TRIGGER OUT

 

DVI

 

 

 

INPUT A

 

D4 VIDEO

RS-232C

G/Y B/PB/CB

R/PR/CR

 

HD/SYNC

VD

 

 

1

2

3

4

5

6

7

1—5INPUT A (BNC jacks)

These jacks receive component video and RGB signals. Component video signals from an A/V component are sent to the 1—3jacks. RGB signals from a computer are sent to the 1—5jacks. Use a BNC cable when connecting this unit to another component.

1G/Y (G or luminance signal)

2B/PB/CB (B or color-difference signal)

3R/PR/CR (R or color-difference signal)

4HD/SYNC (horizontal sync signal, composite sync signal)

5VD (vertical synchronous signal)

6D4 VIDEO (D connector)

This connector receives video signals from the D connector of an A/V component and is compatible with the D1—D4 format.

*This connector is designed for the Japanese D format only.

8S VIDEO (mini DIN jack)

This jack receives S video signals from the S video jack on an A/V component. Use an S video cable when connecting this unit to another component.

9VIDEO (pin jack)

This terminal is for the composite signal from the video terminal of the A/V component. Use a video pin cable.

0INPUT B (D-Sub 15-pin)

This connector receives component video and RGB signals (RGB/YPBPR/YCBCR) from an A/V component or a computer. Use a D-Sub monitor cable when connecting this unit to another component.

qTRIGGER OUT (mini jack)

This jack outputs signals to control external components. A potential of +12V will be provided while this unit is projecting.

7 RS-232C (D-Sub 9-pin)
w DVI (DVI connector)

This connector is used for an examination in the factory.

This connector receives DVI signals (digital RGB) from a computer.

E-2