◆Connecting to a video player, etc.
Using the VIDEO terminalVideo player, etc.
To VIDEO output terminal
1.Connect one end (yellow) of a commercially available video cable to the VIDEO input terminal of this projector.
2.Connect the other end (yellow) of the video cable to the VIDEO output terminal of the video equipment.
2
COMPONENT
Y PB/CB PR/CR 
VIDEO
1To VIDEO input terminal
Video cable (commercially available)
Video player, etc.
| To |
| output terminal |
| 2 |
COMPONENT |
|
Y PB/CB PR/CR |
|
| 1 To |
input terminal |
VIDEO
1.Connect one end of the commercially available
2.Connect the other end of the
When you use this projector with a TV tuner or VCR connected, no image may appear or a No Signal message may appear on the screen when you change to a channel that is not being received. In this case, set the channels of the TV tuner or VCR again. To avoid this problem, use the TV tuner or VCR with its channel skip function enabled. (Only channels that are being received will be displayed.)
◆Connecting to a DVD player or HDTV decoder
This projector can be connected to a video equipment such as a DVD player or HDTV decoder. Be sure to connect component video output terminals of the video equipment to the COMPONENT input terminals of this projector.
Component cable (commercially available)
PB/CB
Y 
PR/CR
•Images may not be projected correctly depending on the type of DVD player you use.
•It may take some time before an image is displayed on the screen depending on the type of the input signal.
COMPONENT
Y PB/CB PR/CR 
PR/CR PB/CB Y
VIDEO
DVD player or HDTV decoder
12