Others
Problem | Solution | |
|
| |
The exhaust vents emit warm | • This air comes out after cooling the inside of the projector. It may feel hot, but this is not a malfunction. | |
air. |
|
|
|
| |
The menu can not be used. | • The microcomputers inside the projector may be wrongly operating because of noise. | |
|
| ➜Press the STANDBY/ON button to turn off the lamp and unplug the power cable from the wall outlet. |
|
| Wait about 10 minutes, plug the power cable in, and try again. |
|
| |
“TEMPERATURE!!” is | • This indication appears when the ambient temperature rises high. When the ambient temperature stays | |
displayed. | high, the lamp goes out. | |
|
| ➜Eliminate any causes of the rise in the ambient temperature. |
|
| • This indication appears when the air intake or exhaust vent is blocked. When they are kept blocked, the |
|
| lamp goes out. |
|
| ➜Remove the objects blocking the air intake or exhaust vent. |
|
|
|
The | mark appears. | • This mark appears when ineffective operation is carried out. This is not a product malfunction. |
|
| |
The remote control does not | • Check that the battery is loaded in the remote control or the battery is not weak (see page 4). | |
function easily or at all. | • Check that the remote control sensor is not exposed to direct sunlight or fluorescent light. | |
|
| • Use the remote control within its operation range (see page 7). |
|
| • Use the remote control at least 10 cm away from the projector. |
|
| |
Abnormal sound is heard. | • Because the color wheel spins at a high speed, metallic sounds may be heard in rare occasions. | |
|
|
|
If the following problem occurs after the lamp is replaced, check the following first.
Problem | Solution | |
|
| |
The projector does not turn | • Fit the lamp cover securely (see page 33). | |
on. | • | Reset the lamp operating time (see page 33). |
|
|
|
The STATUS indicator | • | Reset the lamp operating time (see page 33). |
blinks. |
|
|
|
|
|
37