Yamaha DPX-830 How to set the menus

SATURATION	Unavailable when the input source is HDMI or D-SUB source is an RGB signal.
HUE	Available only when the VIDEO or S-VIDEO source is NTSC or 4.43NTSC signal.
SHARPNESS	Unavailable when the D-SUB or HDMI source is a computer signal.
PROGRESSIVE MODE	Available only when the input signal is TV50, TV60, 480i or 576i.
COLOR SYSTEM	Available only when the input source is VIDEO or S-VIDEO.
SET UP LEVEL	Unavailable when the input source is HDMI, and also when the D-SUB source is a computer signal.
SCART INPUT	Available only when the input source is D-SUB.
HORIZ. POSITION	Unavailable when the input source is HDMI.
VERT. POSITION	Unavailable when the input source is HDMI.
PHASE	Available when the input source is COMPONENT and D-SUB, except RGBCs (576i) signal.
TRACKING	Available only when the D-SUB source is a computer signal.
OVER SCAN	Unavailable when the VIDEO or S-VIDEO source is NTSC, 4.43NTSC, PAL-M, PAL-60 signal.
D-SUB INPUT	Available only when the input source is D-SUB except RGBCs (576i) signal.
SYNC NOISE MASK	Available when the input source is COMPONENT 720p, 1080i signal and D-SUB 720p, 1080i computer
	signal.
CLAMP POSITION	Available when the input source is COMPONENT and D-SUB, except RGBCs (576i) signal.
CLAMP WIDTH	Available when the input source is COMPONENT and D-SUB, except RGBCs (576i) signal.
LPF	Available only when the COMPONENT or D-SUB source is a 480i/p, 576i/p signal, except RGBCs (576i)
	signal.

How to set the menus

Following describe how to set AUTO POWER OFF time as an example.

1.Press the MENU button.

• If no signal is input, the menu does not appear.

TV60

IMAGE

2.Press the or button to select a menu to use.

• SETUP menu is selected in this example.

4. Press the or button to select an item to adjust.

AUTO POWER ON OFF

AUTO POWER	OFF
OFF
SPLASH	ON
SCREEN

5. Set the selected item by pressing the or button.

AUTO POWER	OFF
ON
AUTO POWER	30 min
OFF
SPLASH	ON
SCREEN

TV60

SETUP

3. Press the ENTER button (or button).

		TV60
SETUP
	SCREEN ASPECT	16:9
	VERTICAL	0
	LOCATION
	LAMP MODE	CINEMA
	AUTO POWER	OFF
	ON

AUTO POWER	OFF
OFF

To exit from the menu:

6. Press the MENU button several times.

Important

•If the MENU button does not function, unplug the power cable from the wall outlet. Wait about 10 minutes, plug the power cable in, and try again.

22