Yamaha DPX-830 ◆Connecting to a computer, For analog connections:, For digital connections:

◆Connecting to a computer

Important

•Make sure that the power of the projector and that of the computer are turned off.

•When connecting the projector to a desktop computer, disconnect the RGB cable that is connected to the monitor.

•This projector may not display any image or not operate correctly depending on the computer you wish to connect. In such cases, refer to the instruction manual of the connected computer.

To D-SUB terminal

1	To monitor port
	2

For analog connections:

1.	Connect one end of the supplied RGB cable to the D-SUB
	terminal of this projector.
2.	Connect the other end of the RGB cable to the monitor port
	of the computer.
	• Additional devices, such as a conversion connector and an
	analog RGB output adapter, are required depending on the type
	of the computer to be connected.
	• This projector does not support 3-line signals (SYNC-ON-
	GREEN signals).

HDMID-SUB

RGB cable

COMPONENT

Y PB/CB PR/CR

SERIAL USB

S-VIDEO

TRIGGER

VIDEO

To HDMI terminal
		To DVI
	1	terminal
		2
		DVI-HDMI
		conversion cable
		(commercially
		available)
		COMPONENT
HDMI	Y	PB/CB PR/CR
	D-SUB
SERIAL	USB	S-VIDEO
	TRIGGER
		VIDEO

For digital connections:

1.Connect one end of a commercially available DVI-HDMI conversion cable to the HDMI terminal of this projector.

2.Connect the other end of the DVI-HDMI conversion cable to the DVI terminal of the computer.

•Additional devices, such as a conversion connector and an analog RGB output adapter, are required depending on the type of the computer to be connected.

•When viewing images being input from a digital-connected computer, press the HDMI button on the remote control.

•Turn on the power of the projector before that of the computer.

•Using a long cable may decrease the quality of projected images.

•The signal input from the HDMI terminal does not output through the D-SUB terminal.

14