SWITCHED AC OUTLET(S) | GND terminal (For turntable use) |
English
(China and General models) .............. | 3 SWITCHED OUTLETS |
(Europe models) ................................ | 2 SWITCHED OUTLETS |
(U.K. model) .......................................... | 1 SWITCHED OUTLET |
Use these to connect the power cords from your components to this unit.
The power to the SWITCHED outlets is controlled by this unit’s STANDBY/ON or the provided remote control transmitter’s POWER and STANDBY. These outlets will supply power to any component whenever this unit is turned on.
The maximum power (total power consumption of components) that can be connected to the SWITCHED AC OUTLET(S) is 100 watts.
Connecting the ground wire of the turntable to the GND terminal will normally minimize hum, but in some cases better results may be obtained with the ground wire disconnected.
When using the DTS or other decoder with
DTS or other decoder with
L | L |
R | R |
(Eupore model)
DVD player, LD player or other unit with digital outputs
13
13 | 3/25/99, 3:53 PM |