4 For the DVD/LD or TV/DBS source, the current input mode is also shown.

*To change the input mode for the DVD/LD or TV/DBS source, press INPUT MODE (or the button that you have pressed to select the input source in step 3 on the remote control transmitter) once or more until the desired input mode (AUTO or ANALOG) is shown on the display. (See page 26 for details on switching the input mode.)

Front panel

Remote control

or

Input mode

5 Select the main speakers to be used.

Front panel

* If you use two main speaker systems, press both A and B.

6 Play the source.

7 Adjust the volume to the desired output level.

Front panel

Remote control

or

 

 

English

8 If desired, adjust BASS, TREBLE, BALANCE, etc.

 

(see below) and use the digital sound field processor.

 

 

(see page 29.)

 

 

 

 

 

Selecting the SPEAKER system

Because one or two speaker systems (as main speakers) can be connected to this unit, SPEAKERS allow you to select speaker system A or B, or both at once.

Adjusting the BALANCE control

Adjust the balance of the output volume from the left and right speakers to compensate for sound imbalances caused by speaker location or listening room conditions.

Note

This control is effective only for the sound from the main speakers.

Adjusting the BASS and TREBLE controls

BASS: Turn this clockwise to increase (or counter-clockwise

to decrease) the low frequency response.

TREBLE: Turn this clockwise to increase (or counter-clockwise

to decrease) the high frequency response.

Note

These controls are effective only for the sound from the main speakers.

25

DSP-A595-3

25

3/25/99, 3:53 PM