Operations should be made while watching the information on this unit’s display.
1 | 2 3 |
1
3
2
If you are using the remote control transmitter, set the SELECTOR DIAL to the AMP/TUN or DSP position on the remote control transmitter.
or
1 Turn the power on.
Front panel | Remote control |
or
2 Press SET MENU once or more to select the title “1. CNTR” (so that “CNTR” appears on the display).
Front panel | Remote control |
or
*After pressing SET MENU once on the remote control transmitter, you can also select the title by pressing 
. (Pressing 
goes back one selection.)
3 Press + or – once or more to select the position you want.
Front panel | Remote control |
or
Changes.
4 Repeat steps 2 and 3 to change selections on
“2. REAR”, “3. MAIN”, “4. BASS” and/or “5. M.LVL” in the same way.
Appears.
20
20 | 3/25/99, 3:53 PM |