8 Adjust the sound output levels of the center speaker and the rear speakers so that they become almost as same as that of the main speakers.

Remote control

a)Press or once or more so that “CENTER”, “R SUR.” or “L SUR.” appears on the display.

*Select “CENTER” to adjust the output level of the center speaker and select “R SUR.” or “L SUR.” to adjust the output level of the rear speakers.

Remote control

b)Adjust the level.

*Pressing raises and lowers the level.

*While adjusting, the test tone is fixed on the selected speaker.

Remote control

9 Press TEST once more to cancel the test tone.

Remote control

“TEST” disappears.

Notes

Once you have completed these adjustments, you can adjust the overall sound level on your audio system by using

VOLUME (or VOLUME ( ) on the remote control transmitter) only.

If you use external power amplifiers, you may also use their volume controls to achieve the proper balance.

If the function “1. CNTR” in the SET MENU mode is set to the NONE position, the sound output level of the center speaker cannot be adjusted in step 8. The center sound is automati- cally output from the left and right main speakers.

If there is insufficient sound output from the center and rear speakers, you may decrease the main speaker output level by setting “5. M.LVL” to “–10 dB”.

23

English

DSP-A595-2

23

3/25/99, 3:53 PM