8SPEAKERS

Set A or B (or both A and B) to the ON position for the main speaker system (connected to this unit) you will use. Set it (or them) for the main speaker system you will not use to the OFF position.

9EFFECT

Switches on and off the output from the center and rear speakers so that the sound becomes normal 2-channel.

*Even if the output from the center and rear speakers is off, when the Dolby Digital is decoded, the signals at all channels are distributed to the main channels and output from the main speakers.

0PROGRAM selector

Press these buttons to select the DSP program.

The name of the selected program appears on the display.

qTone controls

These controls are effective only for the sound from the main speakers.

BASS

Used to increase or decrease the low frequency response. The “0” position produces flat response.

TREBLE

Used to increase or decrease the high frequency response. The “0” position produces flat response.

8

wBALANCE

This control is effective only for the sound from the main speakers.

Adjusts the balance of the output volume to the left and right speakers to compensate for sound imbalance caused by speaker location or listening room conditions.

eSET MENU

Press this button to select functions in the SET MENU mode.

rTIME/LEVEL

Press this button to select the setting of delay time or speaker output levels in the TIME/LEVEL mode.

t+/–

These buttons are used to adjust settings of the SET MENU mode and the TIME/LEVEL mode. In the TIME/LEVEL mode, press + to increase delay time or speaker output levels. Press

to decrease delay time or speaker output levels.

yINPUT MODE

Switches the DVD/LD and TV/DBS input signal mode (AUTO/ ANALOG).

uVIDEO AUX terminals

Connect an auxiliary video or audio input source unit such as a camcorder to these terminals. If the connected video unit has a S video output terminal, connect it to the S VIDEO terminal to obtain a high resolution picture. The source connected to these terminals can be selected by INPUT.

DSP-A595-1

8

3/25/99, 3:53 PM