ADJUSTING DELAY TIME AND SPEAKER OUTPUT LEVELS
When using the digital sound field processor including the Dolby Pro Logic Surround decoder or the Dolby Digital decoder, you can adjust the delay time between the main sound and effect sound, and each speaker’s output level as you prefer.
English
1
2
Adjusting method
If you are using the remote control transmitter, set the SELECTOR DIAL to the AMP/TUN or DSP position on the remote control transmitter.
or
1 Press TIME/LEVEL once or more until the name of item which you want to adjust appears on the display.
Front panel | Remote control |
or
*After pressing TIME/LEVEL once on the remote control transmitter, you can also select the name of item by pressing 
.
When pressed, the selection changes as follows:
|
| D E L A Y | Delay time | |
|
| |||
|
|
|
| Center speaker output level |
|
|
|
| |
|
| C E N T E R | ||
|
|
|
| Right rear speaker output level |
|
|
|
| |
|
| R S U R . | ||
|
|
|
| Left rear speaker output level |
|
|
|
| |
|
| L S U R . | ||
|
|
|
| Subwoofer output level |
|
|
|
| |
|
| S W F R | ||
|
| |||
*Pressing 
on the remote control transmitter changes the selection in the reverse order.
*Depending on the mode of this unit, you cannot select all items.
2
1
2 Press + or
Front panel | Remote control |
or
3 Repeat steps 1 to 3 to adjust settings on any other item.
33
33 | 3/25/99, 3:54 PM |