To select a source connected to the 6CH INPUT jacks

Press 6CH INPUT until “6CH INPUT” appears on the front panel display and on the video monitor.

6CH INPUT

or

Front panel

Remote control

Notes

•If “6CH INPUT” is shown on the front panel display and on the video monitor, no other source can be played. To select another input source with INPUT l / h(or the input selector buttons), press 6CH INPUT to turn off “6CH INPUT” from the front panel display and the video monitor.

•If you want to enjoy an audio source connected to the 6CH INPUT jacks together with a video source, first select the video source and then press 6CH INPUT.

4 Start playback (or select a broadcast station) on the source component.Refer to the operation instructions for the component.5 Adjust the volume to the desired output level.

VOLUME

or

Front panel

Remote control

If desired, use BASS, TREBLE and BASS EXTENSION etc. These controls are only effective for sound from the main speakers.

BASS

 

BASS

TREBLE

EXTENSION

 

 

 

 

 

ON OFF

–

+

–

+

 

Front panel

Note

•If the component connected to the VCR 1 OUT, VCR 2/DVR OUT and MD/CD-R OUT jacks is turned off, the reproduced sound may be distorted or the volume may be lowered. In these cases, turn on the component.

BASIC PLAYBACK

6 Use the digital sound field processor.See “Selecting a Sound Field Program”.

DSP

PROGRAM

– +

Front panel or

Remote control

■To mute the soundUse this when you want to temporarily mute audio output.Press MUTE on the remote control.To restore the audio output to the previous volume level, press MUTE again.

y

•You can also cancel mute to press any operation buttons such as VOLUME +/–.

•During muting, “MUTE ON” appears on the front panel display and on the video monitor.

■When you have finished using this unitPress STANDBY/ON (or STANDBY) to set this unit in the standby mode.■Notes on the digital signalThe digital input jacks of this unit can also handle

96-kHz sampling digital signals. (To utilize this, use a source that supports 96-kHz sampling digital signals and set the player for digital output. Refer to the operation instructions for the player.) Note the following when a

96-kHz sampling digital signal is input to this unit:1.The following indication will appear on the front panel display.

V-AUX VCR2/DVR VCR 1 D-TV/CBL DVD MD/CD-R TUNER

CD PHONO

 

 

 

 

VOLUME

PCM

OPERATION

BASIC

 

 

2.DSP programs cannot be selected. Sound will be output as normal 2-channel stereo sound from only the left and right main speakers.

Note

•If “1B MAIN SP” on the SET MENU is set to SMALL and “1D LFE/BASS OUT” is set to SWFR, or “1D LFE/BASS OUT” is set to BOTH, the sound is also output from the subwoofer.

3.Adjustment of the speaker output level described on page 38 cannot be made.

English

25