GETTING STARTED

Checking the Package Contents

Check your package to make sure it has the following items.

Remote control

Batteries (4)

 

(AAA, R03, UM-4)

Quick Reference Card

Quick Reference Card

A/B/C/D/E

Connection guide

INTRODUCTION

Installing Batteries in the Remote

Control

Insert the batteries in the correct direction by aligning the

+and – marks on the batteries with the polarity markings (+ and –) inside the battery compartment.

2

1

3

■Notes on batteries
•Change the batteries periodically.•Do not use old batteries together with new ones.

•Do not use different types of batteries (such as alkaline and manganese batteries) together. Read the packaging carefully as these different types of batteries may have the same shape and color.

■Changing batteries

As the batteries lose power, the operating range of the remote control decreases and the indicator does not flash or its light becomes dim. When you notice any of these conditions, change all of the batteries.

If the remote control is without batteries for more than 2 minutes, or if exhausted batteries remain in the remote control, the contents of the memory may be cleared. When the memory is cleared, insert new batteries, set up the manufacturer code that may have been cleared.

Note

•If the batteries have leaked, dispose of them immediately. Avoid touching the leaked material or letting it come into contact with clothing, etc. Clean the battery compartment thoroughly before installing new batteries.

English

3