SET MENU
■1D LFE/BASS OUT (bass out mode)LFE signals carry
Choices: SWFR (subwoofer), MAIN, BOTH
Initial setting: BOTH
SWFR
Select this if you use a subwoofer. The LFE signals are directed to the subwoofer.
Change this setting if you cannot match the output level of the center and rear speakers with the main speakers because of the unusually
Choices: Normal, –10 dB
Initial setting: Normal
Normal
Normally select this setting.
1D LFE/BASS OUT | 1E MAIN LEVEL |
SWFR MAIN BOTH
MAIN
Select this if you do not use a subwoofer. The LFE signals are directed to the main speakers.
1D LFE/BASS OUT
SWFR MAIN BOTH
BOTH
Select this if you use a subwoofer and you want to mix the main channel
1D LFE/BASS OUT
SWFR MAIN BOTH
Notes
•When playing a
•When you select SMALL (SML) for items 1A, 1B and 1C, the
Normal
–10 dB
Select this if you cannot match the output level of your effect speakers with that of your main speakers when using the test tone. This setting decreases the main speaker output level to about
1E MAIN LEVEL
Normal
Use this feature to adjust the balance of the output level from the left and right main speakers.
Control range: 10 for L/R
Initial setting: 0
Press i to decrease the output level for the left main speaker. Press j for the right main speaker.
2 L/R BALANCE
L• • • • • • • • • • II • • • • • • • • • • R
0
/: Exit
Note
•The L/R BALANCE setting also applies to when headphones are being used.
34