Manuals / Brands / Home Audio / Stereo Amplifier / Yamaha / Home Audio / Stereo Amplifier

Yamaha DSP-AX620 REMOTE CONTROL FEATURES, Selector Dial

1 73

Download 73 pages, 2.73 Mb

REMOTE CONTROL FEATURES

It is possible to control this unit and other YAMAHA A/V components using the remote control supplied with this unit. It is also possible to control components from other manufacturers (or some YAMAHA components) by setting the proper manufacturer code (a signal assigned to each manufacturer and component).

Note

•For the notes on batteries, operating distance and names and functions of the remote control, refer to each description in this manual.

Selector Dial

Select the component (position) to be controlled by the remote control. For example, if the CD position is selected, the remote control is set in the CD operation mode, allowing the CD player to be controlled. When turning the selector dial, the position changes as follows:

AMP/TUN

You can perform the basic operations of this unit.

CD

The code for a YAMAHA CD player is factory-set.

CBL/SAT

A cable TV or satellite tuner can be controlled.

VCR

A VCR can be controlled.

TV

A TV can be controlled.

Selector

dial

TAPE/MD

The code for a YAMAHA MD recoder is factory- set. Be sure to set the proper code when operating a CD recorder or tape deck.

DVD/LD & DVD MENU

An LD player can be controlled in the DVD/LD position. A DVD player can be controlled in the DVD/LD and DVD MENU positions. The code for a YAMAHA DVD player is factory-set.

DSP/TUN

This unit can be controlled and DSP programs can be selected directly.

Notes

•The general operational buttons on the remote control differ depending on the position of the selector dial. See the following pages for details.

•When shipped from the factory, the YAMAHA manufacturer codes listed on page 46 are set for each dial position. If unable to operate your YAMAHA A/V component, please try using another YAMAHA code.

40

Contents

Natural Sound AV Amplifier Amplificateur audio-vidéo CAUTION: READ THIS BEFORE OPERATING YOUR UNIT CONTENTS FEATURES GETTING STARTED Checking the Package Contents Installing Batteries in the Remote Control CONTROLS AND FUNCTIONS Front Panel 8BASS Adjusts the low-frequencyresponse for the left and right main speakers 9TREBLE Adjusts the high-frequencyresponse for the left and right main speakers 0SPEAKERS A/B Remote Control Description of the Numeric Buttons Using the Remote Control Front Panel Display Rear Panel SPEAKER SETUP Speakers to Be Used Speaker Placement CONNECTIONS Before Connecting Components Connecting Audio Components Page Connecting Video Components When using an LD player Connecting the Speakers ■SUBWOOFER jack Connecting an External Amplifier (Europe and U.K. models only) Connecting an External Decoder IMPEDANCE SELECTOR Switch Connecting the Power Supply Cords ON-SCREENDISPLAY (OSD) OSD Modes P01 CONCERT HALL Selecting the OSD Mode SPEAKER MODE SETTINGS Summary of SPEAKER SET Items 1A through 1E ADJUSTING THE SPEAKER OUTPUT LEVELS Before You Begin Using the Test Tone (TEST DOLBY SUR.) TEST DOLBY SUR 4 Press LEVEL repeatedly to select the speaker to be adjusted •While adjusting, the test tone is heard from the selected speaker 6 When the adjustment is complete, press TEST BASIC PLAYBACK To select a source connected to the 6CH INPUT jacks 4 Start playback (or select a broadcast station) on the source component Refer to the operation instructions for the component 5 Adjust the volume to the desired output level ■To mute the sound Use this when you want to temporarily mute audio output Press MUTE on the remote control To restore the audio output to the previous volume level, press MUTE again •You can also cancel mute to press any operation buttons such as VOLUME +/– Input Modes and Indications ■Notes on playing a source encoded with a DTS signal Selecting a Sound Field Program Normal Stereo Reproduction BASIC RECORDING SET MENU Adjusting the Items on the SET MENU SET MENU 1/3 4A CMPNT-VINPUT 1SPEAKER SET (speaker mode settings) 1A CENTER SP 1B MAIN SP 1C REAR L/R SP 1D LFE/BASS OUT 1E MAIN LEVEL 2 L/R BALANCE 3 HP TONE CTRL 4 I/O ASSIGNMENT 4C OPTICAL IN 4D COAXIAL IN 5 INPUT MODE (initial input mode) 6DOLBY D. SET (Dolby Digital set) 6 DOLBY D. SET 7 DTS SET (DTS LFE level) 7 DTS SET 8 SP DELAY TIME 8 SP DELAY TIME 9 DISPLAY SET 9 DISPLAY SET 10 MEMORY GUARD ADJUSTING THE LEVEL OF THE EFFECT SPEAKERS SLEEP TIMER Setting the Sleep Timer Canceling the Sleep Timer REMOTE CONTROL FEATURES Selector Dial Commonly Used Buttons in Any Position of the Selector Dial Controlling the Components Connected to This Unit Button Names and Functions in Each Position ■DVD/LD position ■DVD MENU position •DVD MENU operations cannot be performed for some DVD players ■ VCR position ■ CBL/SAT position ■TV position Setting the Manufacturer Code Returning to the Factory Setting SOUND FIELD PROGRAM Hi-FiDSP Programs CINEMA DSP Programs ■For movie programs: Nos. 7 to Program Input source (group) MOVIE ■MOVIE THEATER 1 and When the input source is analog, PCM or encoded with Dolby Digital in 2-channel 70 mm SPECTACLE 70 mm SCI-FI 70 mm ADVENTURE SOUND FIELD PROGRAM PARAMETER EDITING What is a sound field Sound Field Program Parameters Changing Parameter Settings P07 MOVIE THEATER Resetting a Parameter to the Factory-setValue Sound Field Parameter Descriptions ■LIVENESS early reflections decay 0 – room ■S.DELAY (surround delay) ■S.ROOM SIZE (surround room size) ■S.LIVENESS (surround liveness) ■CT.DELAY (center delay) 0 – 50 msec ■LS.DELAY (left surround delay) TROUBLESHOOTING Page Page ■Remote control SPECIFICATIONS GLOSSARY ■S VIDEO signal ■Component video signal ■PCM (Linear PCM) ■Sampling frequency and number of quantized bits ■I/O assignment (SET MENU) INDEX Page Page CABLE TV SATELLITE TUNER VCR DVD PLAYER LD PLAYER CD PLAYER CD RECORDER/CD-RW MD RECORDER TAPE DECK Page OPTICAL AUDIO OUT S VIDEO VIDEO COMPONENT Analog signal Optical signal S Video signal Video signal Signal flow Quick Reference Card AMP/TUN DSP/TUN TAPE/MD (CD-R) DVD/LD DVD MENU VCR CBL/SAT