Yamaha DSP-AX757SE owner manual Gaudio SET, Elfe Level, Fdynamic Range

■Low-frequency effect level E)LFE LEVEL

Use to adjust the output level of the LFE (low-frequency effect) channel according to the capacity of your subwoofer or headphones. The LFE channel carries low- frequency special effects which are only added to certain scenes. This setting is effective only when this unit decodes Dolby Digital or DTS signals.

Choices: –20 to 0 dB

SET MENU

■Audio settings G)AUDIO SET

Use to customize this units overall audio settings.

G)AUDIO SET

.;;FULL ;;0ms ;;AUTO

p p

E)LFE LEVEL

.;;;;;;0dB

;;;;0dB

p p

Speaker SPEAKER

Select to adjust the speaker LFE level.

Headphone HEADPHONE

Select to adjust the headphone LFE level.

Note

Depending on the settings of “LFE LEVEL”, some signals may not be output from the SUBWOOFER OUTPUT jack.

■Dynamic range F)DYNAMIC RANGE

Use to select the amount of dynamic range compression to be applied to your speakers or headphones. This setting is effective only when the unit is decoding Dolby Digital and DTS signals.

Choices: MIN (minimum), STD (standard), MAX (maximum)

F)DYNAMIC RANGE

.)MAX )MAX

p p

Speaker SP

Select to adjust the speaker compression.

Headphone HP

Select to adjust the headphone compression.

•Select MIN if you regularly listen at low volume levels.

•Select STD for general use.

•Select MAX to preserve the greatest amount of

dynamic range.

Muting type MUTING TYPE

Use to adjust how much the mute function reduces the output volume.

Choices: FULL, –20dB

•Select FULL to completely halt all output of sound.

•Select –20dB to reduce the current volume by 20 dB.

Audio delay AUDIO DELAY

Use to delay the sound output and synchronize it with the video image. This may be necessary when using certain LCD monitors or projectors.

Choices: 0 to 160 ms

Tone bypass TONE BYPASS

Use to select whether audio output bypasses tone control circuitry when TREBLE and BASS are set to 0 dB (see page 31).

Choices: AUTO, OFF

•Select AUTO if you want signals to bypass tone control circuitry to provide the purest signal possible.

•Select OFF if you do not want signals to bypass tone control circuitry.

OPERATION ADVANCED

English

61