Yamaha DSP-AX757SE

CONTROLS AND FUNCTIONS

1STANDBY/ON

Turns on this unit or sets it to the standby mode. When you

turn on this unit, you will hear a click and there will be a 4

to 5-second delay before this unit can reproduce sound.

In standby mode, this unit consumes a small amount of power in

order to receive infrared-signals from the remote control.

2OPTIMIZER MIC jack

Use to connect and input audio signals from the supplied

microphone for use with the AUTO SETUP function (see

page 24).

3Remote control sensor

Receives signals from the remote control.

4Front panel display

Shows information about the operational status of this

unit.

5A/B/C/D/E

(RX-V757 only)

Selects one of the 5 preset station groups (A to E) when

the unit is in tuner mode.

Selects the speaker channel to be adjusted.

6PRESET/TUNING l / h

(RX-V757 only)

Selects preset station number 1 to 8 when the colon (:) is

displayed next to the band indication in the front panel

display when the unit is in tuner mode. Selects the tuning

frequency when the colon (:) is not displayed.

LEVEL –/+

Adjusts the level of the speaker channel selected using

NEXT.

7MEMORY (MAN’L/AUTO FM)

(RX-V757 only)

Stores a station in the memory. Hold down this button for

more than 3 seconds to start automatic preset tuning.

8TUNING MODE (AUTO/MAN’L MONO)

(RX-V757 only)

Switches the tuning mode between automatic (AUTO

indicator on) and manual (AUTO indicator off).

9VIDEO AUX jacks

Input audio and video signals from a portable external

source such as a game console. To reproduce source

signals from these jacks, select V-AUX as the input

source.

0VOLUME

Controls the output level of all audio channels.

This does not affect the REC OUT level.

CONTROLS AND FUNCTIONS

Front panel

MAIN

ZONE ON/OFF

ZONE 2

DISPLAY

S VIDEO VIDEO OPTICALL AUDIO R