Yamaha DSP-AX757SE

CONTROLS AND FUNCTIONS

INTRODUCTION English

CCLEAR

Use to clear functions acquired when using the learn and

rename features, or setting remote control codes (see

page 74).

DLEARN

Use to set up manufacturer codes or program functions

from other remote controls (see pages 69 and 72).

ESLEEP

Sets the sleep timer.

FINPUT MODE

Sets the priority (AUTO, DTS, ANALOG) for the type of

signals received when one component is connected to two

or more of this unit’s input jacks (see page 37).

GMULTI CH IN

Selects MULT I CH INPUT when using an external

decoder (etc.).

HSELECT k/n

Selects another component that you can control

independently of the input component selected with the

input selector buttons.

IAMP

Selects the AMP mode. Y ou must select the AMP mode to

control the main unit.

JVOL +/–

Increases or decreases the volume level.

KMUTE

Mutes the sound. Press again to restore the audio output to

the previous volume level.

LSET MENU

Activates the SET MENU function.

MON SCREEN

Selects the display mode of the on-screen display (OSD)

this unit sends to your video monitor.

NSTRAIGHT (EFFECT)

Switches the sound fields off or on. When STRAIGHT is

selected, input signals (2-channel or multi-channel) are

output directly from their respective speakers without

effect processing.

ONIGHT

Turns on or off the night listening modes (see page 35).

PRadio Data System tuning buttons

(RX-V757 only)

FREQ/TEXT

Press this button when the unit is receiving a Radio Data

System station to cycle the display between the PS mode,

PTY mode, RT mode, CT mode (if the station offers those

Radio Data System data services) and/or the frequency

display (see page 45).

PTY SEEK MODE

Press this button to set the unit to the PTY SEEK mode

(see page 46).

PTY SEEK START

Press this button to begin searching for a station after the

desired program type has been selected in the PTY SEEK

mode (see page 46).

EON

Press this button to select a radio program type (NEWS,

INFO, AFFAIRS, SPORT) to tune in automatically (see

page 47).

The remote control transmits a directional infrared beam.

Be sure to aim the remote control directly at the remote

control sensor on the main unit during operation.

■Handling the remote control

• Do not spill water or other liquids on the remote

control.

• Do not drop the remote control.

• Do not leave or store the remote control in the

following types of conditions:

– places of high humidity, such as near a bath

– places of high temperature, such as near a heater or

stove

– extremely low temperatures

– dusty places

Using the remote control

DISPLAY

S VIDEO VIDEO OPTICALL AUDIO R