Yamaha DSP-AX757SE owner manual Specifications

SPECIFICATIONS

AUDIO SECTION

• Minimum RMS Output Power for Front, Center, Surround,

Surround back
20 Hz to 20 kHz, 0.06% THD, 8 !%		100 W
• Maximum Power (EIAJ)
[China, Korea and General models]
1 kHz, 10% THD, 8 !%		140 W
• Dynamic Power (IHF)
8/6/4/2 !	135/170/200/245 W
• DIN Standard Output Power [U.K. and Europe models]
1 kHz, 0.7% THD, 4 !%		150 W
• IEC Output Power [U.K. and Europe models]
1 kHz, 0.06% THD, 8 !%		110 W
• Damping Factor (IHF)
20 Hz to 20 kHz, 8 !%		120 or more
• Frequency Response
CD terminal to Front L/R	10 Hz to 100 kHz, –3 dB
• Total Harmonic Distortion
PHONO to REC OUT (20 Hz to 20 kHz, 1 V)		..... 0.02% or less
CD, etc. to Front L/R
(20 Hz to 20 kHz, 50 W, 8 !)%		0.06% or less
• Signal to Noise Ratio (IHF-A Network)
Phono (5 mV) to REC OUT
[U.K., Europe and Australia models]		81 dB or more
[Other models]		86 dB or more
CD (250 mV) to Front L/R, Effect Off		100 dB or more
• Residual Noise (IHF-A Network)
Front L/R		150 µV or less
• Channel Separation (1 kHz/10 kHz)
PHONO (shorted) to Front L/R	60 dB/55 dB or more
CD (5.1 k! terminated) to Front L/R	60 dB/45 dB or more
• Tone Control (Front L/R)
BASS Boost/Cut		±6 dB/50 Hz
BASS Turnover Frequency		350 Hz
TREBLE Boost/Cut		±6 dB/20 kHz
TREBLE Turnover Frequency		3.5 kHz
• Phones Output		150 mV/100 !
• Input Sensitivity/Input.................................................................Impedance		2.5 mV/47 k!
PHONO
CD, etc		200 mV/47 k!
MULTI CH INPUT		200 mV/47 k!
• Output Level/Output Impedance		200 mV/1.2 k!
REC OUT
PRE OUT		2 V/1.2 k!
SUBWOOFER		4 V/1.7 k!
ZONE 2 OUTPUT
[U.S.A., Canada, Australia and		200 mV/1.2 k!
Europe models]

VIDEO SECTION

• Video Signal Type		PAL/NTSC
• Signal to Noise Ratio		50 dB or more
• Frequency Response (MONITOR OUT)
Composite, S-video		5 Hz to 10 MHz, –3 dB
Component		5 Hz to 60 MHz, –3 dB
FM SECTION*
• Tuning Range
[U.S.A. and Canada models]		......................... 87.5 to 107.9 MHz
[General model]		87.5/87.50 to 108.0/108.00 MHz
[Other models]		87.50 to 108.00 MHz
• Usable Sensitivity (IHF)		1.0 µV (11.2 dBf)
• Signal to Noise Ratio (IHF)
Mono/Stereo		76 dB/70 dB
• Harmonic Distortion (1 kHz)
Mono/Stereo		0.2%/0.3%
• Stereo Separation (1 kHz)		42 dB
• Frequency Response		20 Hz to 15 kHz, +0.5, –2 dB
AM SECTION*
• Tuning Range
[U.S.A. and Canada models]		530 to 1710 kHz
[General model]		530/531 to 1710/1611 kHz
[Other models]		531 to 1611 kHz
• Usable Sensitivity		300 µV/m
GENERAL
• Power Supply
[U.S.A. and Canada models]		............................ AC 120 V, 60 Hz
[Australia model]		AC 240 V, 50 Hz
[China model]		AC 220 V, 50 Hz
[Korea model]		AC 220 V, 60 Hz
[U.K. and Europe models]	...............................	AC 230 V, 50 Hz
[General model]	AC 110/120/220/230–240 V, 50/60 Hz
• Power Consumption
[U.S.A. and Canada models]		................................ 400 W/500 VA
[Other models]		440 W
• Standby Power Consumption		0.1 W or less
• AC Outlets
[U.K. and Australia models]		............. 1 (Total 100 W maximum)
[U.S.A., Canada and China models] ... 2 (Total 100 W maximum)
[Europe and General models]		................ 2 (Total 50 W maximum)
• Dimensions (W x H x D)		435 x 171 x 420 mm
• Weight		12.5 kg

*Except DSP-AX757SE

INFORMATION	ADDITIONAL
English

95