Yamaha DVD-C920 owner manual Digital outputs, Analog outputs, Required Audio settings See p.25, 26

m

Never connect this unit and other equipment to power supply until all connections have been completed.

Be sure all connections are made correctly, observing the color-coding of terminals of both this unit and the equipment to be connected. Also refer to the instructions of the equipment to be connected.

Subwoofer

Center	speaker
Left main	Right main
speaker	speaker

LeftrearRightrear

speakerspeaker

® ®

°,+®®

.....®®

•Digital outputs

This unit hasCOAXIAL and OPTICAL digital output

terminals. Connect one of them to your AV amplifier equipped with Dolby digital, DTS, or MPEG decoder using each specific cable (separate purchase).

Required Audio settings (See p.25, 26 and 27):

•Digital Audio Output _ On

•PCM Down Conversion, Dolby Digital, DTS Digital Surround, MPEG _ Verify your AV amplifier's capabil- ity.

Notes on digital recording

You can record the source from this unit through your AV center (AV amplifier, etc.) or connecting these terminals directly to your CD recorder, etc.

•With CD, wait for the total play time to appear before turning on your recording unit's synchro recording feature. The beginning may be cut off if you turn it while 'READING' is displayed.

•With DVDs, recording may be interrupted when a new chapter begins. If it persists, use analog recording by making analog connections. These phenomena occur because DVD player must first determine the audio format and sampling frequency before switching digital output.

•Analog outputs

@6CH DISCRETE terminals

This unit incorporates multi-channel decoder and can be connected to your AV amplifier as an external decoder. With this connection, you can enjoy a 96 kHz or more sampling frequency multi-channel audio track on a DVD-Audio disc, etc. even if the disc is copyright-protected. However, your AV amplifier's digital sound processing features have no effect on the audio signals output from these terminals.

Required Audio settings (See p.25, 26 and 29):

•Speaker settings _ Multi-channel*

•Digital Audio Output -* Off

*Also make output mode, delay time and speaker balance adjustments.

@AUDIO OUT (MIXED 2CH) terminals

You can connect this unit to any component that has analog 2 channel input terminals using the RCA audio cable supplied with this unit.

8