(U.S.A. model)
COMPONENT S VIDEO
VIDEO IN INPUT
AV amplifier
COMPONENT | S VIDEO | VIDEo |
VIDEO OUT | OUT | OUT |
COMPONENT | S VIDEO | VIDEo |
VIDEO IN | IN | IN |
II
Video monitor
_'li'li'l_*liPliT
If your AV amplifier has video terminals, connect your amplifier (and then to your video monitor) so that you can use one video monitor for several different video sources (LD, VCR etc.) by simply switching the input source selector of your amplifier.
This unit has three types of video output terminals. Use one
of them in accordance with the input terminals of the
equipment to be connected.
•Do not connect this unit to a video monitor through a video cassette recorder. If you do so, the picture may not be played back properly due to the copyright protection technology incorporated in this unit.
@Component Video terminal
Component video connection achieves high fidelity in
reproducing colors (better performance than
connection), separating video signal into luminance (Y,
terminal
blue,R, red). Use commercially available coaxial cables.
Amplifier (and Video monitor) with component input is required. Observe the color of each terminal when connect-
ing. If your amplifier does not have component output
terminals, connecting this unit's component output directly
to your video monitor's component input can reproduce better video image.
•Do not connect this unit's COMPONENT VIDEO OUT terminals to component video input terminals special for HD (High- Definition) TV.
@S-Video terminal
S (separate) video connection achieves a clearer picture than
composite video connection by separating color and
luminance when transmitting signals. Use commercially available
_Composite Video terminal (1, 2)
Use RCA video cable supplied with this unit
when connecting this unit to a video monitor.
VIDEO 1, 2 terminals of VIDEO OUT output the same
signal. You can connect one to your amplifier's input using supplied RCA cable, and the other to another amplifier or a video monitor.
9
