Yamaha DVD-C920 owner manual Setting method, To change settings

ENTER

Numeric buttons

Depending on software capability, you can prevent discs or scenes with objection- able material from being played according to your desired rating. You can select the level and lock it by designating password.

Level 8All DVDs can be played.

Level 7 to 1 Level of restriction becomes severer as the

number gets smaller.

Level 0All DVDs cannot be played.

•Setting method

_Jl Follow steps 1 to 4 of 'Operating the Setup Menu' (see p.25) to select the desired level.

[] Enter 4-digit number with numeric buttons and press ENTER.

•Press CANCEL if you want to re-enter other number.

The screen that confirms your password appears. Do not forget your password.

Press ENTER.

When you select a disc that exceeds the rating you have set, a message appears on the monitor. If you want to play the disc, select 'Yes' and enter your password.

The unit unlocks the setting. It will be locked again by selecting another disc, opening the disc tray or turning the unit off.

•To change settings

You must enter your designated password when you unlock the player (level is set

to 8), change the level, change the password, or unlock the playback of currently selected disc.

Select 'Ratings' and then follow each procedure appears on the screen.

Decide whether to output high-quality digital signals (sampling frequency of 88.2 kHz and 96 kHz) or not, in accordance

with the capability of the connected component.

•If your AV amplifier etc. is capable of handling high-rate sampling frequency digital signals, select 'No'.

•If not, select 'Yes' so that digital output signals are converted to 48 kHz or 44.1 kHz.

•If a disc is copy-right protected or has a sampling frequency of 176.4 kHz or more, signals are automatically converted to either 48 kHz or

44.1kHz.

If you wish to enjoy multi-channel sound reproduction connecting this unit's 6CH DISCRETE output terminals to your amplifier etc., you need to select 'Multi- channel' and make following adjustments. Also, set your amplifier's input mode to analog.

ENTER

28