Using commercially available speakers or cables

When using speakers or cables other than those of the YAMAHA NX-P150 (consisting of four satellite speakers, a center speaker and a subwoofer) and its supplied cables, be careful of the following. When using a commercially available speaker cable, remove the cable plug from one of the supplied speaker cables and attach it to the cable you are using.

When using commercially available speakers

•Use speakers with 6-ohm impedance or more. If a speaker with less than 6-ohm impedance is used, the protective circuit may trip or the speaker may malfunction.

•Use magnetically shielded speakers to prevent interferences with a TV. If these speakers still interfere with a TV, move the speakers a little away from the TV.

•We recommend using speakers of the same manufacturer that have identical sound qualities. If they are mixed, certain sounds may be heard unnaturally.

•Use speaker cables that are the same thickness as the supplied cables.

When using commercially available speaker cables

•Use speaker cables that are the same thickness as the supplied cables.

■To replace speaker cables

1Press and hold the release button and remove the supplied speaker cable from the cable plug.

Connecting Speakers

2Peel away about 10 mm (10/32”) of covering from the tip of the new cable and twist the cable core firmly in a clockwise direction.

10 mm (10/32”)

Clockwise

Note

Be sure to twist the cable core firmly in a clockwise direction. Twisting loosely may cause a short.

3Press and hold the release button, insert the cable core into the cable plug, then release the button.

Match the speaker cable polarity (+/–) with the polarity mark (+/–) of the cable plug.

Polarity mark –

Polarity mark +

PREPARATION

Release button

11