Presetting Radio Stations
You can preset your favorite radio stations automatically (FM stations only) or manually to tune the stations simply by selecting the preset group and number. The CinemaStation can store up to 40 stations (5 groups x 8 stations) in its memory.
Presetting FM stations automatically (Auto Preset)
If the FM radio wave reception is strong in your area, Auto Preset is a quick and useful way to preset FM radio stations. If you want to preset AM stations or the FM radio wave reception is weak in your area, preset stations manually (page 52).
A/B/C/D/E PRESET/BAND
MEMORY
Display AUTO/MAN’L
dPRESET/TUNING u
1Press PRESET/BAND on the CinemaStation to select FM (Preset mode).
Each time you press the button, the mode changes as follows:
↓
“FM” (Tuning mode)
↓
“AM” (Tuning mode)
↓
“FM:” (Preset mode)
2Press AUTO/MAN’L to select Auto Preset mode.
Make sure “AUTO” lights up in the CinemaStation display.
| PROG | SLEEP | Lights up |
| REP | AUTO ST | |
|
| MEMORY |
|
|
| TUNED |
|
|
|
|
|
|
|
|
|
■To specify a starting group and number
You can specify a preset group and number that store the first detected FM station. Also, you can start Auto Preset at the frequency currently selected toward higher or lower frequency.
1Carry out steps 1 and 2 in the “Presetting FM stations automatically (Auto Preset)” procedure on this page.
2Press and hold MEMORY for about three seconds.
The MEMORY indicator blinks in the display.
3While MEMORY is blinking, press A/B/C/D/E to select the starting preset group, then press PRESET/TUNING uor dto select the preset start number.
4Press PRESET/BAND to turn off the colon (:), then press PRESET/TUNING uor d.
C1FM 76.0
Disappears
When you press PRESET/TUNING d, Auto Preset starts at the frequency currently displayed and tunes toward the lower frequencies, and when you press PRESET/TUNING u, Auto Preset tunes toward the higher frequencies.
y
•When presetting a radio station, the CinemaStation automatically sets the reception mode (stereo or monaural) at the same time.
•Auto Preset automatically stops after searching the whole frequency range or detecting 40 stations.
•If you select a preset number that has been already applied to other station, it will be replaced with the new station.
•If the MEMORY indicator stops blinking before you perform step 3 above, Auto Preset is cancelled and you must start the procedure again.
RADIO ENJOYING
3Press and hold MEMORY for about three seconds.
“MEMORY” and “AUTO” blinks in the CinemaStation display, then Auto Preset starts at the frequency currently selected toward higher frequency in a few seconds.
When Auto Preset finishes, “MEMORY” and “AUTO” turns off and the CinemaStation automatically applies a preset group and number to each detected FM station.
51