Troubleshooting
Problem | Cause | Solution |
A digital equipment or high- | The CinemaStation may be placed | Place the CinemaStation further away |
frequency equipment | close to the digital equipment or | from such equipment. |
produces noises |
| |
|
|
|
The Set Menu configurations | The power to the CinemaStation may | Make sure the power cable is plugged |
have been cleared | be lost more than a week. | into the outlet firmly, then configure the |
|
| Set Menu settings again. (page 75) |
|
|
|
The volume does not | The power of the component | Turn on the power of the component |
increase or sounds are | connected to a CinemaStation’s | connected to a CinemaStation’s output |
distorted | output jack may be turned off. | jack. |
|
|
|
Recording sounds does not | The sound field effects are not |
|
reflect the sound field effect | available for recording. |
|
settings |
|
|
|
|
|
Sound played on the | You may be trying to make a digital | Use proper audio sources. |
CinemaStation cannot be | recording with an analog source, or |
|
recorded with an external | analog recording with a digital |
|
recorder | source. |
|
|
|
|
| The recording equipment may be | Connect them with a digital connection. |
| connected to the CinemaStation with | |
| an analog connection. |
|
|
|
|
Sounds played on the AV | Either the AV equipment or recording | Connect those equipment to the |
equipment connected to the | equipment may be connected to the | CinemaStation with analog |
CinemaStation cannot be | CinemaStation with a digital | connections. (page 16) |
recorded with external | connection. |
|
recording equipment |
|
|
|
|
|
The CinemaStation does not | The CinemaStation may receive a | Set the CinemaStation to the Standby |
operate properly | strong electrical shock, such as from | mode, then disconnect the power cable. |
| a lightening bolt or excessive static | Wait for about 30 seconds, then connect |
| electricity, or drop in power supply. | the power cable and turn on the |
|
| CinemaStation. |
|
|
|
A digital equipment or high- | The CinemaStation may be placed | Place the CinemaStation further away |
frequency equipment | close to digital equipment or high- | from such equipment. |
produces noises | frequency equipment. |
|
|
|
|
The Set Menu | The power to the CinemaStation may | Make sure the power cable is plugged |
configurations have been | be lost more than a week. | into the outlet firmly, then configure the |
cleared |
| Set Menu settings again. (page 75) |
|
|
|
82