Troubleshooting

 

 

 

Problem

Cause

Solution

The center speaker makes

The volume of the center speaker

Adjust the volume level of the center

no sound

may be set to minimum level.

speaker. (page 65)

 

 

 

 

You may be listening to a Dolby

Dolby Digital and DTS audio sources do

 

Digital or DTS audio source.

not contain a center speaker signal.

 

 

 

 

One of the DSP program in the

Select another DSP program. (page 26)

 

Music group (other than 5ch Stereo)

 

 

may be selected.

 

 

 

 

 

In the Set Menu, “CENTER” may be

Configure the Set Menu properly.

 

set to “NON”.

(page 77)

 

 

 

The surround speakers

The volume of the surround speakers

Adjust the volume level of the surround

make no sound

may be set to minimum level.

speakers. (page 65)

 

 

 

 

You may be listening to a monaural

Select another DSP program. (page 26)

 

source with the Theater DSP

 

 

Program (page 26).

 

 

 

 

The subwoofer makes no

The volume of the subwoofer may

Adjust the volume level of the subwoofer.

sound

be set to minimum level.

(page 65)

 

 

 

 

You may be listening to an audio

The subwoofer does not support signals

 

source that does not contain any low

outside the specified range.

 

tone signal such as LFE.

 

 

 

 

The subwoofer makes

The subwoofer may be placed

Place the subwoofer in the correct

strange sounds

improperly.

position. For details, refer to the manual

 

 

for the subwoofer.

 

 

 

 

The subwoofer cable may be

Make sure the subwoofer cable is

 

connected improperly.

connected properly. (page 10)

 

 

 

The speaker does not

The speaker setting may be

Make sure you configure the speaker

output low tones properly

improper.

settings properly. (page 77)

 

 

 

The volume does not

The power of the equipment

Turn on the power of the equipment

increase or sounds are

connected to a CinemaStation’s

connected to a CinemaStation’s output

distorted

output jack may be turned off.

jack.

 

 

 

Recording sounds does

The sound field effects are not

 

not reflect the sound field

available for recording.

 

effect settings

 

 

 

 

 

A source being played

You may be trying to make a digital

Use the analog recording method. (pages

back on CinemaStation

recording of an AM/FM broadcast.

17 and 55)

(DVD, CD, AM/FM

 

 

You may be trying to make a

Depending on the recorder, DTS sources

broadcast, etc.) does not

recording of a DTS source.

may not record properly. For further

record when using an

 

information, refer to the owner’s manual

external component

 

supplied with the recorder you are using.

 

 

 

A source being played

You may be trying to make a digital

Use the proper audio source.

back on an AV component

recording of an analog source, or

 

connected to the

analog recording of a digital source.

 

CinemaStation (MD

 

 

recorder, etc.) does not

 

 

record when using an

 

 

external recorder

 

 

 

 

 

The CinemaStation does

The CinemaStation may receive a

Set the CinemaStation to the Standby

not operate properly

strong electrical shock, such as from

mode, then disconnect the power cable.

 

a lightening bolt or excessive static

Wait for about 30 seconds, then connect

 

electricity, or drop in power supply.

the power cable and turn on the

 

 

CinemaStation.

 

 

 

APPENDIX

81