is normally set to match the transmission or reception channel of the MlDI equipment to which the DX100 is connected.

Data is entered using the DATA ENTRY control or -1/+1 buttons. Subsequent presses on the CHANNEL button call the “Omni: on/off”, “Midi R Ch=1–16”, and “Midi T Ch=1–16” selection modes.

4: CH INFO

This is the MIDI channel information “button”. It turns transmission and reception of all MIDI BASIC EVENT DATA and OTHER EVENT DATA (with the exceptions noted below) ON or OFF. This function is turned ON or OFF using the -1/+1 buttons.

Data transmitted and received whether this function is OFF or ON is:

*KEY ON/OFF

*SUSTAIN FOOTSWITCH ON/OFF

*PITCH BEND WHEEL POSITION

*MONO/POLY MODE SWITCH

Data received whether this function is ON or OFF is:

* ALL NOTES OFF

Data NOT transmitted when this function is OFF is:

*MODULATION WHEEL POSITION

*BREATH CONTROLLER DATA

*DATA ENTRY CONTROLLER AND SWITCH DATA

*VOLUME (DATA ENTRY control in PLAY mode)

*PORTAMENTO FOOTSWITCH ON/OFF

*PROGRAM CHANGE (VOICE NUMBER) DATA

Data not received when this function is OFF is:

*ALL OF THE ABOVE

*PORTAMENTO TIME

NOTE:

The above MIDI data is generally common to all keyboards and equipment compatible with the MIDI system. Due to differences in the features provided by some manufacturers, however, complete compatibility can not be guar- anteed.

5: SYS INFO

This function turns transmission and reception of MIDI SYSTEM EXCLUSIVE INFORMATION data ON or OFF. The -1/+1 buttons are used to turn this function ON or OFF. When this function is ON, voice parameter changes made in the DX100’s EDIT or FUNCTION modes are transmitted in real time.

If the SYS INFO button is pressed again, the “Midi Transmit?” display will appear. If the YES button is then pressed, then the DX100 will perform a bulk dump of all voice data–INTERNAL RAM voices 1 through 24. Voices 25–32 will be dumped as INIT VOICE parameters.

23