Yamaha dx100 STEP 15:, STEP 16:, Add Amplitude Modulation to OP2, Store Completed Voice in RAM, As a final precaution, go back to the FUNCTION mode and turn

STEP 15:

STEP 16:

Add Amplitude Modulation to OP2

As a final enhancement to our voice, let’s add just a touch of amplitude modulation to OP2—the main piano sound modulator. This will create a subtle chorus effect.

Select the LFO WAVE parameter, set to triangle. Select the LFO SPEED parameter, set to 28.

Select the AMD (Amplitude Modulation Depth) parameter, set to 52.

Select the MODULATION SENSITIVITY, AMPLITUDE parameter, set to 1 for OP2 only (press the OPERATOR/AMS ON-OFF button).

Now try the voice. That’s it! Name the new voice, if you like, by entering the FUNCTION mode and using the VOICE NAME function. The only step that remains is to store our new voice in a RAM memory location.

Store Completed Voice in RAM

Press the INTERNAL button, then BEFORE DOING ANYTHING ELSE: hold down the STORE button and press the voice selector to which you wish to store the new voice.

As a final precaution, go back to the FUNCTION mode and turn

43