Yamaha DX200 3. Realtime Messages, 4. System Common Messages

127

MIDI Data Format

Appendix

2.2.1.18 User Pattern Effect bulk dump

This message sets the User Pattern Voice Effect block (see Tables <4-1> and <4-7>).

2.2.1.19 User Pattern Multi Part bulk dump

This message sets the User Pattern Voice Multi Part block (see Tables <4-1> and <4-9>).

2.2.1.20 User Pattern Rhythm Step Seq bulk dump

This message sets the User Pattern Rhythm Step Seq block (see Tables <4-1> and <4-11>).

2.2.1.21 User Song bulk dump

This message sets the User Song block (see Tables <4-1>, <4-12> and <4-13>).

2.2.2 DX bulk dump

11110000 F0H Exclusive status

01000011 43H YAMAHA ID

0000nnnn 0NH N:Device Number

0ttttttt TTH Format No.

0sssssss SSH ByteCountMSB

0ttttttt TTH ByteCountLSB

0vvvvvvv VVH Data

: :

0kkkkkkk KKH Check-sum

11110111 F7H End of Exclusive

Address and Byte Count are given in tables <3-n>. Byte Count is indicated by the total size

of the Data in tables <4-n>.

Bulk dump is received when the beginning of the block is speciﬁed in "Address."

"Block" indicates the unit of the data string that is indicated in tables<3-n> as "Total size."

Check sum is the value that produces a lower 7 bits of 0 when the DATA, and the Check-sum

itself are added.

2.2.2.1 VCED bulk dump

This message sets the VCED block (see Table <2-1> and <2-2>).

2.2.2.2 ACED bulk dump

This message sets the ACED block (see Table <2-1> and <2-3>).

2.2.2.3 VMEM bulk dump

This message sets the VMEM block (see Table <3-1> and <3-2>).

2.2.2.4 AMEM bulk dump

This message sets the AMEM block (see Table <3-1> and <3-3>).

3. Realtime Messages

3.1 Active Sensing

11111110 FEH

This is transmitted by 200msec.

After FE is received one time, if the MIDI signal does not come within 400 msec, DX200 will act

the same as when ALL SOUND OFF, ALL NOTE OFF, and RESET ALL CONTROLLERS are

received, and return to the condition where has not been received once.

3.2 Timing Clock

11111000 F8H