Yamaha DX21 5.The 128 Voice ROM Memory, SPLIT POINT set at

SPLIT POINT set at 60

5.The 128 Voice ROM Memory

The split point number on the LCD will change to the number of the pressed key, the “A” voice will be playable on all keys to its left (Including the split key), and the “B” voice will be playable on all keys to the right of the split key. This process can be repeated as many times as necessary, but you must press and hold the S POINT key again every time you re-program the split point.

As in the DUAL mode, the A/B BALANCE control can be used to balance the volume levels of the “A” and “B” voices.

The DX21 comes with 128 different pre-programmed voices in an internal ROM (Read Only Memory). These voices can be loaded in groups of 8, or singly, into the DX21’s selectable 32-voice RAM memory. The ROM voices are organized into 16 different categories, each containing 8 voices (see next page).

To load these voices into the DX21's RAM voice memory for selection and use, see A11: LOAD INTERNAL MEMORY and A12: LOAD SINGLE INTERNAL MEMORY in the following chapter.

7