Yamaha HTR-5760 Result Exit, Error, ERROR E-5, If an error screen appears, Result Wiring

8Use the cursor buttons to display the results.

•Press u/ dto display information about individual results.

•Press j / i to switch between each result list.

AUTO SETUP

■If an error screen appears

1Press SELECT to display detailed information about the error.

RESULT:WIRING

FRONT L;;;;;;;OK

[<]/[>]:Select

[SELECT]:Return

9When finished, press SELECT.

The RESULT:EXIT screen appears.

10Press u / d to select SET or CANCEL.

RESULT:EXIT

. )SET
p	p

SET	To apply the auto setup (YPAO)
	settings.
CANCEL	To cancel the auto setup (YPAO)
	without making any changes.

11Press SELECT to set or cancel the auto setup settings.

y

If you are not satisfied with the result or want to manually adjust each setup parameter, use the manual setup parameters (see page 51).

ERROR

.

)RETRY

p p

2Press j / i to switch between error messages.

For details about each message, see page 29.

ERROR: E-5

<NOISY >

Keep SILENT

[SELECT]:Return

3When finished, press SELECT to return to the main error screen.

4Press u / d to select RETRY or EXIT, then press SELECT.

ERROR

E-5:NOISY

. )RETRY EXIT [p]/[p]:Up/Down [SELECT]:Enter

PREPARATION

Notes	RETRY	To retry the auto setup procedure.
• If E-10 appears during testing, restart the procedure from step 3.	EXIT	To exit auto setup.
• To cancel the auto setup procedure before completion, press
SET MENU.

English

27