Yamaha HTR-5760 owner manual Enjoying 2-channelsoftware

PLAYBACK

Notes

•Some 6.1-channel compatible discs do not have a signal (flag) which this unit can automatically detect. When playing these kinds of discs with 6.1-channel, select a decoder (PLIIx Movie, PLIIx Music, EX/ES or EX) manually.

•6.1-channel playback is not possible even if EX/ES is pressed in the following cases:

–When “SURR L/R SP” (see page 53) or “SURR B L/R SP” (see page 54) is set to NONE.

–When the source connected to the MULTI CH INPUT jack is being played.

–When the source being played does not contain surround left and right channel signals.

–When a Dolby Digital KARAOKE source is being played.

–When “2ch Stereo” or Direct Stereo is selected.

•When the power of this unit is turned off, the input mode will be reset to AUTO.

•When the DTS-ES decoder is applied to DTS 96/24 signals, you cannot use the DTS 96/24 decoding feature.

•The Pro Logic IIx decoder is not available when “SURR B L/R SP” is set to NONE (see page 54).

•PLIIxMovie cannot be selected when “SURR B L/R SP” is set to SMLx1 or LRGx1 (see page 54).

■Enjoying 2-channel software

Signals input from 2-channel sources can also be played back on multiple channels.

Press q/DTS on the remote control to select the decoder.

q/DTS

9

You can select from the following decoders depending on the type of software you are playing and your personal preference.

PRO LOGIC SUR. STANDARD

Standard processing for Dolby Surround sources.

PRO LOGIC SUR. ENHANCED

CINEMA DSP enhanced processing for Dolby Surround sources.

PRO LOGIC IIx Movie*

Dolby Pro Logic II/IIx processing for movie software.

PRO LOGIC IIx Music*

Dolby Pro Logic II/IIx processing for music software.

PRO LOGIC IIx Game*

Dolby Pro Logic II/IIx processing for game software.

DTS Neo:6 Cinema

DTS processing for movie software.

DTS Neo:6 Music

DTS processing for music software.

*Use the PLII/PLIIx parameter to select the Pro Logic II or Pro Logic IIx decoders (see page 69).

Note

The Pro Logic IIx decoder is not available when “SURR B L/R SP” is set to NONE (see page 54).

34