Yamaha HTR-5760 owner manual Resetting parameters to the factory presets, 4Press u / d to select

4Press u / d to select

PRESET/CH

the parameters.

SELECT

5Press j / i to change the parameter value.

When you set a parameter	PRESET/CH
to a value other than the
factory-set value, an	SELECT
asterisk mark (*) appears
by the parameter name on
the front panel display.

6Repeat steps 3 through 5 as necessary to change other program parameters.

Note

You cannot change parameter values when “MEMORY GUARD” is set to ON. If you want to change the parameter values, set “MEMORY GUARD” to OFF (see page 59).

Memory back-up

The memory back-up circuit prevents the stored data from being lost even if this unit is set in the standby mode, the power cord is disconnected from the AC outlet, or the power supply is temporarily cut due to power failure. However, if the power is cut for more than one week, the parameter values will return to the factory settings. If this happens, edit the parameter value again.

■Resetting parameters to the factory presets

To reset a certain parameter

Select the parameter you want to reset, then press j / i repeatedly until the asterisk mark (*) next to the parameter name disappears.

To reset all parameters

Use PARAM. INI (see page 59).

EDITING SOUND FIELD PARAMETERS

INFORMATION	ADDITIONAL
English

65