Yamaha HTR-6080 Advanced sound configurations, settings, Changing sound field parameter, 61 En

Advanced sound configurations

Changing sound field parameter
	4 Press Dk / n to select the desired sound
settings	field parameter and then Dl / h to change
	the selected sound field parameter value.
You can enjoy good quality sound with the initial factory
settings. Although you do not have to change the initial		PARAMETER
factory settings, you can change some of the parameters to
better suit the input source or your listening room.	Cursor		.	MOVIE
				1/2

	DSP LEVEL;;;;0dB
Note
	P.INIT.DLY;;16ms
	P.ROOM.SIZE;;1.0
	S.INIT.DLY;;20ms

You cannot change the sound field parameter values when “MEMORY GUARD” in “OPTION MENU” is set to “ON” (see page 83). If you want to change the sound field parameter values, set “MEMORY GUARD” to “OFF”.

1Turn on the video monitor connected to this unit.

2Set the operation mode selector to KAMP and then press ODISPLAY on the remote

control.

The following status screen appears in the OSD.

STATUS

[RETURN]:STATUS

y

•For details about the function and control range of each sound field parameter, see page 63.

•When you set a sound field parameter to a value other than the initial factory settings, an asterisk mark (*) appears by the sound field parameter name in the OSD.

•The available sound field parameters for some of the

sound field programs may be displayed on more than one page in the OSD. In this case, press Dk/ nto scroll

through pages.

•If you press and hold Dl/ hto change the sound field parameter value, the initial factory settings are shown momentarily in the front panel display.

•Use the “PARAM. INI” feature in “OPTION MENU” to initialize the parameters of each sound field program within a sound field program group (see page 83).

•You can select the amount of time that the current status is displayed in the OSD by using the “OSD-AMP” parameter in “OPTION MENU” (see page 82).

OPERATION ADVANCED

	5 Press ODISPLAY to turn off the sound field
3 Press one of the sound field program
	parameter display.
selector buttons (P) repeatedly to select the
desired sound field program you want to
adjust.

English

61 En