Customizing this unit (MANUAL SETUP)
y
Use this feature to activate the desired decoder manually when this unit cannot detect the signal flag encoded to the input sources correctly.
Notes
•The available decoders vary depending on the setting of the speakers and the input sources.
•
–when “SUR. L/R SP” (see page 73) or “SUR.B L/R SP” (see page 73) is set to “NONE”.
–when the component connected to the MULTI CH INPUT jacks is being played.
–when the source being played does not contain surround left and right channel signals.
–when a Dolby Digital KARAOKE source is being played.
–when this unit is in the stereo playback, Compressed Music Enhancer (see page 46) or Pure Direct (see page 48) mode.
–when
•When this unit is turned off, this setting will be reset to “AUTO”.
2 INPUT MENU
Use this menu to reassign the input/output jacks, select the input mode or rename the input source.
MANUAL SETUP
2 INPUT MENU
.A)I/O ASSIGNMENT B)INPUT RENAME C)VOLUME TRIM D)DECODER MODE E)MULTI CH SET [p]/[p]:Up/Down [ENTER]:Enter
■Input/output assignment
A)I/O ASSIGNMENT
Use this feature to assign the input/output jacks according to the component to be used if the initial settings of this unit do not correspond to your needs. Change the following parameters to reassign the respective jacks and effectively connect more components.
Once the input/output jacks are reassigned, you can select the corresponding component by using the INPUT selector on the front panel (or the input selector buttons on the remote control).
y
The input source name in parentheses indicates the default assigned input source.
For COMPONENT VIDEO jacks A, B and C
Choices: [A] DVD, DTV/CBL,
[B]DVD, DTV/CBL,
[C]DVD, DTV/CBL,
INPUT MENU
.[A];;;;; DVD
( DVD )
[B];;;;;DTV/CBL (DTV/CBL))
[C];;;;; DVR
( DVR )
