Yamaha HTR-6080 Audio and video signal flow, 17 En, Audio signal flow, Video signal flow, Notes

Audio and video signal flow

■Audio signal flow

InputOutput

HDMI

DIGITAL AUDIO (COAXIAL)

DIGITAL AUDIO (OPTICAL)

AUDIO

Digital output

Analog output

Connections

■Video signal flow

InputOutput

HDMI

COMPONENT

VIDEO

S VIDEO

VIDEO

Through

Video conversion ON (see page 82)

PREPARATION

Notes

•2-channel as well as multi-channel PCM, Dolby Digital and DTS signals input at the HDMI IN 1 or HDMI IN 2 jack can be output at the HDMI OUT jack only when “SUPPORT AUDIO” is set to “OTHER” (see page 77).

•Audio signals input at the HDMI IN jacks are not output at the AUDIO output and DIGITAL OUTPUT jacks.

Notes

•When the analog video signals are input at the COMPONENT VIDEO, S VIDEO and VIDEO jacks, the priority order of the input signals is as follows:

1.COMPONENT VIDEO

2.S VIDEO

3.VIDEO

•Digital video signals input at the HDMI IN 1 or HDMI IN 2 jack cannot be output from analog video output jacks.

•The analog component video signals with

480i (NTSC)/576i (PAL) of resolution are converted to the S-video or composite video signals and output at the S VIDEO MONITOR OUT and VIDEO MONITOR OUT jacks.

•This unit does not accept analog component video signals with 1080p of resolution.

•The OSD signal is not output at the VCR OUT and DVR OUT jacks and is not recorded.

•Use the “HDMI UP-SCALING” parameter in “DISPLAY SET” to deinterlace and convert the resolution of the video signals output at the HDMI OUT jack (see page 81).

English

17 En