English
25

To change mLAN settings, select [Start | (All) Programs | Start Up], then start mLAN Manager.

- (When a message such as “file cannot be found” appears when uninstalling:)

Try executing the installation once more, then uninstall again.

■(Windows) mLAN Manager (the mLAN icon in the task bar) has disappeared.

• Select [Start | (All) Programs | Start Up (or mLAN Tools)], then select mLAN Manager.

Specifications

■General Specifications

■Input/Output Specifications

Sampling Frequency Internal, External Normal Rate Fs 44.1kHz(–10%) to 48kHz(+6%)*1
Double Rate Fs 88.2kHz(–10%) to 96kHz(+6%)
Frequency
Response
Fs 44.1kHz, 48kHz 20Hz to 20kHz 0+1/–3dB, Input to Master Output L/R (Fs 48kHz, MIC/LINE)
Fs 88.2kHz, 96kHz 20Hz to 40kHz 0+1/–3dB, Input to Master Output L/R (Fs 96kHz, MIC/LINE)
Total Harmonic Distortion Less than 0.01% 1kHz, Line Input to Master Output L/R (Input Gain = Min,
Output Vol = Max)
Dynamic Range 110dB Line Input to Master Output L/R (1/2ch) or 3–8 ch
Noise level –100dBu (Output Vol: Min.), –90dBu (Output Vol: Max.)
Crosstalk 75dB 1kHz
AD converter 24bit Linear, 128times over sampling (Fs 44.1,48kHz) / 64time over sampling
(Fs 88.2,96kHz)
DA converter 24bit Linear, 128times over sampling (Fs 44.1,48kHz) / 64time over sampling
(Fs 88.2,96kHz)
Interface Functions
Compatible mLAN transfer rate S400 (400Mbps) / S200 (200Mbps)
mLAN Audio I/F
18ch Input / 18ch Output (Fs 44.1kHz, 48kHz)
Type: Input (Analog) 8ch, Digital Input 2ch, ADAT Input 8ch
14ch Input / 14ch Output (Fs 88.2kHz, 96kHz)
Type: Input (Analog) 8ch, Digital Input 2ch, ADAT Input 4ch
MIDI I/F 1 Input port / 1 Output port
Analog Input Connector Input level
Nominal Max. before clip Input Impedance
INPUT 1,2
XLR/TRS Phone Combo*2,
Balanced, +48V ±3V Phantom,
Mic/Line/Hi-Z
–60dBu to –16dBu (Mic) –2dBu 3kΩ
–34dBu to +10dBu (Line) +24dBu
–56dBu to –12dBu (Hi-Z) +2dBu 500kΩ
INPUT 3-8 TRS Phone*3, Balanced, Line –20dBu to +10dBu +24dBu 10kΩ
INSERT IN 1-2 TRS Phone*4, UnBalanced –2dBu +12dBu 10kΩ
Analog Output Connector
Output level
Nominal Max. before clip Actual Load Impedance
(Rated Load Impedance)
OUTPUT 1-8
(MASTER OUT L/R) TRS Phone, Balanced*3 +4dBu +18dBu 2kΩ (10kΩ)
INSERT OUT 1-2 TRS Phone*4, UnBalanced –2dBu +12dBu 600Ω (10kΩ)
PHONES TRS Phone, UnBalanced — 100mW+100mW 33Ω (33Ω)