English
20
Making mLAN Connections
In an mLAN system, you can easily configure and maintain the system, connect or disconnect the
mLAN connectors on the computer and each mLAN device (virtual audio /MIDI input and output
connectors), and make various mLAN connection settings (such as synchronization) by using the
mLAN Graphic Patchbay and mLAN Auto Connector software applications. There is no need to re-
patch audio and MIDI cables to accommodate various music production environments.
mLAN Auto Connector
This software application enables you to connect a computer to a single mLAN device.
It enables you to easily select wordclock and audio input and output channels.
For information on installing and using the software, refer to the separate Installation Guide.
You can also use mLAN Graphic Patchbay to connect a computer to a single mLAN device.
mLAN Graphic Patchbay
This graphic software application enables you to manage mLAN connection settings for the con-
nected computer and multiple mLAN devices. You can immediately grasp connections in their
entirety by viewing displayed mLAN system configuration graphics. You can also intuitively mod-
ify wordclock settings and audio and MIDI signal routing, much as if you were connecting phys-
ical cables.
For information on installing and using the software, refer to the separate Installation Guide and
the mLAN Graphic Patchbay Online Manual.
NOTE
Windows Macintosh
Windows Macintosh