Yamaha i88x Control, Others

English

*1: Signal input from ADAT-compatible device: Normal Rate Fs 44.1KHz(–6%) to 48KHz(+6%)

Double Rate Fs 88.2KHz(–6%) to 96KHz(+6%)

*2: Always balanced, regardless of whether a XLR-3-31 or TRS phone is used. (1=GND, 2=HOT, 3=COLD/Tip=HOT, Ring=COLD,

Sleeve=GND)

*3: Balanced Phone (Tip=HOT, Ring=COLD, Sleeve=GND)

*4: INSERT IN & OUT feature unbalanced phone jacks. (Tip = OUTPUT, Ring=INPUT, Sleeve=GND)

*5: ALESIS proprietary multi-channel optical digital interface format

In these speciﬁcations, when dBu represents a speciﬁc voltage, 0 dBu is referenced to 0.775 Vrms.

■Control

*6: Phantom power (+48 V) is not supplied when the TRS phone is used. If the [HI-Z/LINE/MIC] switch is set to HI-Z, phantom

power is not supplied to INPUT jack 1.

■Others*Speciﬁcations and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or speciﬁcations at any time without prior notice. Since speciﬁcations, equipmentr or options may not be the same in every locale, please check with your Yamaha dealer.

Digital Input/

Output Connector Format Recommended

output level Other details

ADAT/DIGITAL

OPTICAL IN, OUT OPTICAL

ADAT*5 —Supports DOUBLE

(up to 96 kHz).

IEC-60958 Consumer use

(DIGITAL) —

DIGITAL STEREO

IN, OUT RCA PIN IEC-60958 Consumer use 0.5Vpp/75ΩThe IN jack features an internal

sampling rate converter.

MIDI IN, OUT A/B DIN 5pin MIDI —

mLAN 1/2 IEEE1394 6pin mLAN — Compatible with S400 and S200

Input Gain Gain Knob 1, 2, 3, 4, 5/6, 7/8

Phantom Switch Phantom (+48V) On/Off for Input1,2 channel with LED*6

Gain Select Switch (PAD Switch) Input Ch 1 : Mic/Line/Hi-Z, Input Ch 2 : Mic/Line

Peak LED Input 1, 2 channel

Monitor Select Switch (Fs Indicator) Direct Monitoring Channel Selector : 1/2, 3/4, 5/6, 7/8, Digital In / Fs Indicator

(holding down a while)

Monitor LED (Fs Indicator) Direct Monitoring Channel Selector : 1/2, 3/4, 5/6, 7/8, Digital In / Fs Indicator :

44.1, 48, 88.2, 96kHz

Monitor Volume Direct Monitoring Volume for selected channel by monitor switch

Master Volume Output Level of Master Output L/R and Phones

Optical Select Switch Digital / ADAT Normal / ADAT Double

Master Clock LED mLAN / ADAT / Internal (ﬁxed at 44.1kHz)

mLAN Active LED For Information of mLAN’s situation

Power Switch Stand by/On switch

Supplied Accessories Power Adaptor (PA-5D), Owner’s Manual set, CD-ROM x 2, mLAN (IEEE1394)

cable

Power Consumption 16W

Dimensions 480(W) x 372.7(D) x 44(H)

Weight 3.9kg