Yamaha IMX644 owner manual

IMX644 Manager Owner’s Manual 1

• The software and this manual are the exclusive copyrights of Yamaha Corporation.

• Please read carefully the Software Licensing Agreement at the end of this manual before installing the software.

•Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written con-

sent of the manufacturer.

•Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsi-

ble for the results of the use of this manual and the software.

•Future upgrades of application and system software and any changes in speciﬁcations and functions will be announced at the following

URL.

• The illustrations and screens as shown in this manual are for instructional purposes only, and may appear somewhat different from

those on your computer.

•Windows is a registered trademark of Microsoft® Corporation in the United States and other countries.

• The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.

•Speciﬁcations and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or

modify products or speciﬁcations at any time without prior notice. Since speciﬁcations, equipment or options may not be the same in

every locale, please check with your Yamaha dealer.

http://www.yamahaproaudio.com/

Precautions when using the [USB] connector

When connecting the computer to the [USB] connector, make sure to observe the following points. Failing to do so risks freezing the

computer and corrupting or losing the data. If the computer or the device freezes, restart the application software or the computer OS,

or turn the power to the device off then on again.

CAUTION

• Use an AB type USB cable of less than about 3 meters.

• Before connecting the computer to the [USB] connector, exit from any power-saving mode of the computer (such as suspend, sleep,

standby).

• Before turning on the power to the device, connect the computer to the [USB] connector.

•Execute the following before turning the power to the device on/off or plugging/unplugging the USB cable to/from the [USB] con-

nector.

- Make sure that data is not being transmitted from the device.

- Quit any open application software on the computer.

• While the computer is connected to the device, you should wait for six seconds or more between these operations: (1) when turning

the power of the device off then on again, or (2) when alternately connecting/disconnecting the USB cable.

Owner’s Manual