Yamaha IMX644 Starting IMX644 Manager

IMX644 Manager Owner’s Manual 8

NOTE

• In order for the IMX644 and your computer to be connected online, you must connect the IMX644 to your computer and then power-on the

IMX644 while holding down its MEMORY [D] button (IMX644 Manager mode). Use either a USB cable or an RS-232C cable to make this

connection. If you’re using an RS-232C cable, use a female-female cross cable.

• If both a USB cable and an RS-232C cable are connected, the USB connection will take priority.

•Do not switch between USB and RS-232C connections after starting-up the IMX644. If you need to switch connections, you must power-off

the IMX644 and then restart the IMX644 while holding down its MEMORY [D] button.

To start up IMX644 Manager, choose [Start] → [All Programs] → [Yamaha IMX644 Manager] → [IMX644 Manager],

or double-click the shortcut icon on the desktop.

When IMX644 Manager starts up, the starting screen will appear first.

1[Parameter Edit] button

This button opens the Parameter Edit screen, allowing you to edit parame-

ters or to save parameter settings as a file.

If you click this when the [Status] indicator is “Online,” the “Password”

dialog box will appear. Enter the previously assigned password for the

IMX644, and click the [OK] button. The IMX644’s settings will be loaded

into IMX644 Manager, and the Parameter Edit screen (BLOCK screen)

will appear.

If you click this when the [Status] indicator is “Offline,” the “Confirma-

tion” dialog box will appear. If you want to edit parameters offline, click

[OK].

NOTE

•If no password has been assigned to the IMX644 (i.e. with the factory settings or if the IMX644 has been initialized), the “Register Pass-

word” dialog box will appear. Enter the password (between one and eight characters long) that you want to assign to the IMX644, enter

the same password in the Confirm field, and click the [OK] button.

•If you don’t know the password or if you want to change the password, you’ll need to initialize the IMX644’s internal memory. Initiali-

zation will return the settings to their factory-set state, so be sure to save any important settings as a file before you proceed. The

IMX644 will be initialized if you turn on the power while holding down its MEMORY [A] and [D] buttons.

Starting IMX644 Manager