IMX644 Manager Owner’s Manual 9
2[File Transfer] button
This button loads a file of settings and sends it to the
IMX644.
If you click this when the [Status] indicator is
“Online,” the “Password” dialog box will appear.
Enter the assigned password for the IMX644 and
click the [OK] button; the File Load dialog box will
appear. Select the parameter file (extension “.i6x”)
that you want to send to the connected IMX644, and
click the [Open] button. The Transferring dialog box
will appear, and the settings will be sent.
NOTE
• If no password has been assigned to the IMX644, the
“Register Password” dialog box will appear. Enter the password (between one and eight characters long) that you want to assign to the
IMX644, enter the same password in the Confirm field, and click the [OK] button.
•If you don’t know the password or if you want to change the password, you’ll need to initialize the IMX644’s internal memory. Initiali-
zation will return the settings to their factory-set state, so be sure to save any important settings as a file before you proceed. The
IMX644 will be initialized if you turn on the power while holding down its MEMORY [A] and [D] buttons.
•Use caution; when a parameter file is loaded and sent to the IMX644, some settings may cause high-volume sound to be produced from
the speakers if the levels in the new file are higher than the previous settings.
•If you want to view the contents of the parameter file, click the [Parameter Edit] button while offline to open the Parameter Edit screen,
and then load the parameter value.
3[Status] indicator
This shows the status of communication between the IMX644 and IMX644 Manager.
4[Quit] button
This button closes IMX644 Manager. When you click it, a confirmation dialog box will appear; click [OK].
Status Condition
The IMX644 and IMX644 Manager are communicating; i.e., they are online. When you edit a
parameter in IMX644 Manager, that setting will be reflected on the IMX644 in real-time.
To go online, connect your computer to the IMX644 via a cable, and power-on the IMX644
while holding down its MEMORY [D] button.
The IMX644 and IMX644 Manager are not communicating; i.e., they are offline. When you
edit a parameter in IMX644 Manager, the change will not be reflected on the IMX644.In this
state you can perform offline editing or view the contents of a parameter file.
Searching for a connected IMX644. If you click the [Parameter Edit] button in this state, you’ll
be editing offline.