IMX644 Manager Owner’s Manual 17
7[PRIORITY]/[OVERRIDE] button
This turns on/off the Priority Ducker function (MONO INPUT channels only) or the Music Override function (STEREO
INPUT channels only). The on/off state of this button is linked with the Priority Ducker Key Source Select or Music Override
Key Source Select check boxes in the MISC screen. For more about the Priority Ducker function and Music Override function,
refer to page 21.
8[OUT1]–[OUT4] buttons
Here you can specify the output channels (OUTPUT channels 1- 4) to which the input channel signals are sent. These settings
are linked with the matrix settings in the MATRIX screen.
9[LINK] button, fader, marker, [LOCK] button
Here you can adjust the volume of the input channel. These parameters are the same as in the BLOCK screen’s “LEVEL” dia-
log box; refer to page 14 for details.
Here you can specify the output channels to which the input channel signals are sent.
The send levels from MONO INPUT channels to the OUTPUT channels can also be adjusted here.
NOTE
• From the IMX644’s panel, you can temporarily turn on a send from a specific input channel to an OUTPUT channel. However, output
assignments made in this way are only temporary and will not be saved to memory. For details, refer to the IMX644 Owner’s Manual.
1Matrix setting buttons
These turn on/off the send from the input channel to each OUTPUT channel.
When a button is on (green), the signal will be sent from the corresponding input channel to the OUTPUT channel. When a
button is off (gray), the signal will not be output.
Signals can be sent to the REC OUT channel only from OUTPUT channels.
The default settings are: sends to all OUTPUT channels are on, with only OUTPUT channel 1 assigned to the REC OUT chan-
nel.
2Send level indicator
This sets the level of the signal sent from the MONO INPUT channel to the OUTPUT channel in a range of -Inf (-∞)–0dB.
Click the [ ]/[ ] buttons to edit the value.
MATRIX screen
Parameter Range Default
Send Level -Inf – 0.0dB 0.0dB
1
2