IMX644 Manager Owner’s Manual 20
7EQ response curve
This indicates the frequency response of the current EQ settings. This is an approximate curve for your reference.
The markers ( ) indicate the parameter values for each band. The color of the markers corresponds to the band number (1–6)
shown below.
By dragging a marker (left-click and move the mouse while holding down the button) you can specify the EQ response quickly
and visually. Use the parameter indications below to make fine adjustments to the values.
8Type
The following EQ types can be specified for each band.
The default setting is [P.EQ] with the following parameter values.
9Parameter indication (F/G/Q)
These indicate the center/cutoff frequency (F), gain (G), and Q. To edit the values, click the [ ]/[ ] buttons or use the mouse
to drag the markers ( ) in the EQ response curve display.
Type Parameter Range
P.EQ (Peaking EQ)
F 40Hz – 18kHz
G -15dB – +15dB
Q 0.5 – 12.0
HPF (High Pass Filter)
F 40Hz – 18kHz
Slope 12dB/oct (Fixed)
Q 0.7 (Fixed)
LPF (Low Pass Filter)
F 40Hz – 18kHz
Slope 12dB/oct (Fixed)
Q 0.7 (Fixed)
L.Shelf (Low Shelving EQ) F 40Hz – 18kHz
G -15dB – +15dB
H.Shelf (High Shelving EQ) F 40Hz – 18kHz
G -15dB – +15dB
Parameter Default
Q 0.7 (common to all bands)
G 0.0dB(common to all bands)
F1 40Hz
F2 100Hz
F3 500Hz
F4 2kHz
F5 5kHz
F6 10kHz