IMX644 Manager Owner’s Manual 6
Installing the IMX644 USB Driver (Windows XP users)
1Power-off the IMX644.
2Use a USB cable to connect the IMX644 to your computer.
The “Found New Hardware Wizard” screen will appear.
NOTE
• Make the USB connection directly to your computer without going through a USB hub.
•A dialog box may ask you whether you want to connect to Windows Update. If so, select the option button at the left of “No, not this
time,” and click [Next].
3Select the option button located at the left of “Install from a list or a specified location (advanced),” and
click [Next].
4
Select the option button located at the left of “Search for the best driver in these locations,” select
“Include this location in the search.” Then click the [Browse] button, and inside the IMX644 folder, select
the folder that contains the driver (by default this will be “C:\Program Files\YAMAHA\IMX644\Usbimx644”),
and click [Next].
NOTE
•If a message indicating that the software “has not passed logo testing” appears during the installation, click [Continue].There is no need
to halt the installation. If this message does not appear, simply proceed to the next step.
5When the installation is completed, a message indicating this will appear.
Click the [Finish] button to close the screen.
6While holding down the IMX644’s MEMORY [D] button, power-on the IMX644.
The IMX644 will start up in IMX644 Manager mode.
7Start up IMX644 Manager, either by choosing [Start] → [All programs] → [YAMAHA IMX644 Manager] →
[IMX644 Manager], or by double-clicking the shortcut icon on the desktop.
If the software was installed successfully, IMX644 Manager’s [Status] indicator will light green, and it
will be online. If IMX644 Manager does not go online, refer to page 25 of “Troubleshooting.”